02-25-2015 09:50 AM - edited 03-17-2019 02:06 AM
Hello,
I hope this is a simple question. I'm still getting accustomed to this new IP phone system of ours and I can't seem to find a value to adjust for this user's request. We have a call handler that we use to record bad weather memos for the company and its default greeting recording window is too short for management; they tend to get cut off before they can finish telling each division their schedules. Is there a way to extend this recording timeframe to allow for a longer advisory message?
I'm using Cisco Unity Connection version: 10.5.1.10000-7 to manage VM, call handlers and the like. I've found the 'Maximum message length' field, currently set to 300 seconds, but I believe that governs the messages left on a given voicemail box, not the greeting itself.
Solved! Go to Solution.
02-25-2015 12:28 PM
Hi Kenny,
My understanding is that the Greeting Length for a Call Handler is determined by the COS of the person recording the Greeting. Have a look;
Class of Service Greetings Settings
The class of service greetings setting specifies the maximum length of greetings.
Subscribers > Class of Service > Greetings Page
Field Considerations
Maximum Greeting Length in Seconds
Select the recording length allowed to subscribers assigned to this COS for recording greetings.
The range is 1 to 999 seconds; the default is 90 seconds.
Greeting Length
Do the following procedure to specify how long the recorded greeting of a user can be.
To Specify Maximum Length of User Greetings
--------------------------------------------------------------------------------
Step 1 In Cisco Unity Connection Administration, find the COS that you want to change, or create a new one.
Step 2 On the Edit Class of Service page, under Greetings, enter the maximum length in seconds in the field.
Step 3 Click Save.
Cheers!
Rob
02-25-2015 12:28 PM
Hi Kenny,
My understanding is that the Greeting Length for a Call Handler is determined by the COS of the person recording the Greeting. Have a look;
Class of Service Greetings Settings
The class of service greetings setting specifies the maximum length of greetings.
Subscribers > Class of Service > Greetings Page
Field Considerations
Maximum Greeting Length in Seconds
Select the recording length allowed to subscribers assigned to this COS for recording greetings.
The range is 1 to 999 seconds; the default is 90 seconds.
Greeting Length
Do the following procedure to specify how long the recorded greeting of a user can be.
To Specify Maximum Length of User Greetings
--------------------------------------------------------------------------------
Step 1 In Cisco Unity Connection Administration, find the COS that you want to change, or create a new one.
Step 2 On the Edit Class of Service page, under Greetings, enter the maximum length in seconds in the field.
Step 3 Click Save.
Cheers!
Rob
03-08-2016 06:06 AM
Hello,
If i upload an audio file bigger than 90 seconds i have to make this config?
Regards
Leonardo Santana
02-25-2015 01:45 PM
This appears to be perfect; I had not visited this section of the management area before. I was able to confirm that the setting was currently set to 90 seconds (which I would have thought would be long enough) and confirm that this manager was a part of the selected COS group. I'm optimistic that this will work and I appreciate the prompt (and thorough) answer.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide