Extension number report

[crockettr]

Hi folks,

I need to pull a report with all the extension numbers with the descriptions for E911 that are setup in Call Manager. Any tips on the best way to do this? I have CM 4.1. CDR is not very upfront to giving me this information easily. We have about 750 extension numbers ranging in the 4000s - 5000s. All are DID numbers so when dialing 911 they are going to be given the Building and Suite number of that caller.

[erdiazgue]

Hi,

Use the Bulk Administration Tool (BAT) to generate a report of all extension numbers with their descriptions.

BAT:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_user_guide_chapter09186a00800da1b3.html

[erdiazgue]

BAT complete pdf:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_user_guide_book09186a00802126c2.html

[crockettr]

SWEET....thanks. I didn't think of that obviously. Got exactly what I wanted.

[erdiazgue]

No problem, please rate the post.