10-12-2013 02:03 PM - edited 03-16-2019 07:51 PM
Hola
Tengo un VG 224, con sccp, el problema que tengo es que cuando quiero trasferir una llamada, si no la contestan la llamada se regresa al telefono desde donde la transferi.
Tengo la llamada, marco flash, me da tono de marcado, marco la extension, escucho que llama y cualgo, despues de colgar como a un segundo y se me regresa la llamada.
Si espero a que me contesten, la llamada pasa sin problemas.
Version del VG
vg224-i6k9s-mz.151-1.T2.bin
Config
Building configuration...
Current configuration : 7938 bytes
!
! Last configuration change at 07:34:16 UTC Fri Mar 5 1993 by sonda
!
version 15.1
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname MERVG01C
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
!
!
ip source-route
ip cef
no ipv6 cef
!
stcapp ccm-group 1
stcapp
!
stcapp feature access-code
prefix *
call forward all 2
call forward cancel 3
pickup local 17
pickup group 18
pickup direct 19
!
stcapp feature speed-dial
redial 9
digit 2
speed dial from 1 to 9
!
!
!
stcapp supplementary-services
port 2/0
hold-resume
fallback-dn 5414
port 2/1
hold-resume
fallback-dn 5456
port 2/2
hold-resume
fallback-dn 5457
port 2/3
hold-resume
fallback-dn 5458
port 2/4
hold-resume
fallback-dn 5459
port 2/5
hold-resume
fallback-dn 5460
port 2/6
hold-resume
fallback-dn 5461
port 2/7
hold-resume
fallback-dn 5462
port 2/8
hold-resume
fallback-dn 5463
port 2/9
hold-resume
fallback-dn 5406
port 2/10
hold-resume
fallback-dn 5429
port 2/11
hold-resume
fallback-dn 5430
port 2/12
hold-resume
fallback-dn 5431
port 2/13
hold-resume
fallback-dn 5432
port 2/14
hold-resume
fallback-dn 5433
port 2/15
hold-resume
fallback-dn 5434
port 2/16
hold-resume
fallback-dn 5435
port 2/17
hold-resume
fallback-dn 5441
port 2/18
hold-resume
fallback-dn 5442
port 2/19
hold-resume
fallback-dn 5444
port 2/20
hold-resume
fallback-dn 5413
port 2/21
hold-resume
fallback-dn 5422
port 2/22
hold-resume
fallback-dn 5423
port 2/23
hold-resume
fallback-dn 5424
!
!
!
!
voice dsp release early
!
!
!
!
voice-card 0
!
username sonda privilege 15 secret 5 $1$XEKn$S4vVhdGL43Zu5PqHmhlOw1
!
!
!
!
!
!
!
!
!
interface FastEthernet0/0
description Voice Interface
ip address 10.5.185.250 255.255.255.0
duplex full
speed 100
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
ip route 0.0.0.0 0.0.0.0 10.5.185.254
!
!
!
control-plane
!
!
voice-port 2/0
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5414
caller-id enable
!
voice-port 2/1
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5456
caller-id enable
!
voice-port 2/2
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5457
caller-id enable
!
voice-port 2/3
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5458
caller-id enable
!
voice-port 2/4
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5459
caller-id enable
!
voice-port 2/5
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5460
caller-id enable
!
voice-port 2/6
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5461
caller-id enable
!
voice-port 2/7
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5462
caller-id enable
!
voice-port 2/8
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5463
caller-id enable
!
voice-port 2/9
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5406
caller-id enable
!
voice-port 2/10
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5429
caller-id enable
!
voice-port 2/11
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5430
caller-id enable
!
voice-port 2/12
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5431
caller-id enable
!
voice-port 2/13
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5432
caller-id enable
!
voice-port 2/14
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5433
caller-id enable
!
voice-port 2/15
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5434
caller-id enable
!
voice-port 2/16
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5435
caller-id enable
!
voice-port 2/17
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5441
caller-id enable
!
voice-port 2/18
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5442
caller-id enable
!
voice-port 2/19
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5444
caller-id enable
!
voice-port 2/20
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5413
caller-id enable
!
voice-port 2/21
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5422
caller-id enable
!
voice-port 2/22
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5423
caller-id enable
!
voice-port 2/23
ring cadence pattern02
no battery-reversal
mwi
timeouts ringing infinity
timing hookflash-in 700 100
station-id number 5424
caller-id enable
!
!
!
sccp local FastEthernet0/0
sccp ccm 10.5.62.235 identifier 2 version 7.0
sccp ccm 10.5.185.254 identifier 4 version 7.0
sccp ccm 10.5.62.234 identifier 3 version 7.0
sccp ccm 10.5.15.253 identifier 1 version 7.0
sccp
!
sccp ccm group 1
bind interface FastEthernet0/0
associate ccm 1 priority 1
associate ccm 2 priority 2
associate ccm 3 priority 3
associate ccm 4 priority 4
!
dial-peer voice 100 pots
service stcapp
port 2/0
!
dial-peer voice 101 pots
service stcapp
port 2/1
!
dial-peer voice 116 pots
service stcapp
port 2/16
!
dial-peer voice 117 pots
service stcapp
port 2/17
!
dial-peer voice 118 pots
service stcapp
port 2/18
!
dial-peer voice 119 pots
service stcapp
port 2/19
!
dial-peer voice 120 pots
service stcapp
port 2/20
!
dial-peer voice 121 pots
service stcapp
port 2/21
!
dial-peer voice 122 pots
service stcapp
port 2/22
!
dial-peer voice 123 pots
service stcapp
port 2/23
!
dial-peer voice 102 pots
service stcapp
port 2/2
!
dial-peer voice 103 pots
service stcapp
port 2/3
!
dial-peer voice 104 pots
service stcapp
port 2/4
!
dial-peer voice 105 pots
service stcapp
port 2/5
!
dial-peer voice 106 pots
service stcapp
port 2/6
!
dial-peer voice 107 pots
service stcapp
port 2/7
!
dial-peer voice 108 pots
service stcapp
port 2/8
!
dial-peer voice 109 pots
service stcapp
port 2/9
!
dial-peer voice 110 pots
service stcapp
port 2/10
!
dial-peer voice 111 pots
service stcapp
port 2/11
!
dial-peer voice 112 pots
service stcapp
port 2/12
!
dial-peer voice 113 pots
service stcapp
port 2/13
!
dial-peer voice 114 pots
service stcapp
port 2/14
!
dial-peer voice 115 pots
service stcapp
port 2/15
!
Gracias
10-25-2013 02:15 AM
Hey,
I think you have a better chance to get help if you write in english.
I ran your post trough Google translate and if I have understood your question correct I think you should try to add this command under your dial peers for the SCCP FXS ports.
no tone dialtone remote-onhook
Please remember to rate helpful responses and identify helpful or correct answers.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide