How to configure the SRST mode Voice gateway is there any other procedure required for configuration
.
.
.
sccp local FastEthernet0/0
sccp ccm IP identifier 10
sccp ccm IP identifier 12
sccp ccm IP identifier 30
sccp
!
sccp ccm group 1
associate ccm 10 priority 1
associate ccm 12 priority 2
associate ccm 30 priority 3
switchback method graceful
!
!
You’ll need to have a reference for the IP of the SRST gateway in your sccp configuration. And of course you’ll have to configure SCCP SRST on the gateway.
sccp ccm <IP of GW> identifier 40
sccp ccm group 1
associate ccm 40 priority 4
