Fax rate on global configuration for SIP based CUBE

[Mohsin Khan Feroz]

Hello Support community,

We would like to enforce the FAX RATE on the CUBE for all the calls. I know that the "Fax Rate <rate>" command on the dial-peers would do but I would like to know if there is any possibility to go it on the Global Configuration such as on "voice service voip" to avoid individual configuration on each Dial-peer.

The call flows are.

Incoming:

ITSP ---> CUBE ---> CUSP ---> CVP / CUCM

Outgoing:

CUCM ---> CUBE

[Muhammad Awais Khan]

Hi,

I remember there is global command for Pots but did not find for VOIP. In your case 'Voice service Pots' will be not required since you are using VOIP  dial-peer.

[zdesignstudio]

Only the protocol can be configured globally via SIP. If using MGCP you can configure the fax rate globally.