cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
600
Views
15
Helpful
3
Replies

Fractional E1 - MGCP gateway

hoanghiep
Level 1
Level 1

Hi all,

We configured fractional E1 on our MGCP gateway (1st 10 channels only).

My question is: Is it supported by Cisco? If any problems happen, do I get support from them? (and if possible, anyone can show me the documents/sites indicating that the feature is/is not supported?)

Thanks,

hoanghiep.       

3 Replies 3

Jaime Valencia
Cisco Employee
Cisco Employee

No, such is unsupported. If you want fractional T1/E1 you need to use H323.
You can search the topic in CSC and most likely find a reference link. Or search CCO for mgcp + fractional.

Sent from Cisco Technical Support iPad App

HTH

java

if this helps, please rate

yes, jaime is correct,

also depends on the IOS version running on the H323 voice gateway. i was forced to dongrade a IOS version on a case where a fractional E1 was needed.

Regards,

Anas Abueideh
Level 9
Level 9

Hi,

for partial E1 you need H323 gateway, it is not supported on MGCP

HTH

Anas

please rate if it is helpful

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: