06-21-2014 04:21 AM - last edited on 03-25-2019 08:30 PM by ciscomoderator
we have 2811 router with h.323.
we confiugre the voice on it.
we got the disconect issue.
when i call from outline to AA number ,and on hook, after that the phone still ring about 20s,
I know we need configure custome disconnet tone, but i did not know which value is it.
i find some documnet on cisco web ,,i catch the packet ,but i did not know how to decode it.,and transfer to audio file.
i following next website ,and got the packet files.
https://supportforums.cisco.com/discussion/10892466/fxo-ringing-problem
confiugre is following:
trunk group PSTN
!
!
!
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
!
voice class codec 10
codec preference 1 g729r8
!
voice class custom-cptone neo
dualtone disconnect
frequency 425
cadence 500 500
!
!
!voice-card 0
!
!
application
service aa flash:/its-CISCO.2.0.2.0.tcl
param operator 0
paramspace english language en
paramspace english index 0
param queue-len 1
paramspace english location flash:
paramspace english prefix en
!
control-plane
!
!
voice-port 0/0/0
trunk-group PSTN
supervisory disconnect dualtone mid-call
supervisory custom-cptone neo
cptone HK
timeouts interdigit 3
timeouts call-disconnect 2
timeouts wait-release 2
caller-id enable
!
voice-port 0/0/1
trunk-group PSTN
supervisory disconnect dualtone mid-call
supervisory custom-cptone neo
cptone HK
timeouts interdigit 3
timeouts call-disconnect 2
timeouts wait-release 2
caller-id enable
!
voice-port 0/0/2
trunk-group PSTN
supervisory disconnect dualtone mid-call
supervisory custom-cptone neo
cptone HK
timeouts interdigit 3
timeouts call-disconnect 2
timeouts wait-release 2
caller-id enable
!
voice-port 0/0/3
trunk-group PSTN
supervisory disconnect dualtone mid-call
supervisory custom-cptone neo
cptone HK
timeouts interdigit 3
timeouts call-disconnect 2
timeouts wait-release 2
caller-id enable
!
!
!
!
dial-peer voice 9 pots
translation-profile outgoing fxoout
service aa
destination-pattern 9T
incoming called-number .
direct-inward-dial
port 0/0/0
!
dial-peer voice 2100 voip
description TO CUCM PUB
preference 3
destination-pattern 2...
session target ipv4:10.125.65.131
dtmf-relay h245-alphanumeric
no vad
!
dial-peer voice 9000 pots
!
dial-peer voice 11 pots
translation-profile outgoing fxoout
service aa
destination-pattern 9T
incoming called-number .
direct-inward-dial
port 0/0/1
!
dial-peer voice 12 pots
translation-profile outgoing fxoout
service aa
destination-pattern 9T
incoming called-number .
direct-inward-dial
port 0/0/2
!
dial-peer voice 13 pots
service aa
destination-pattern 9T
incoming called-number .
port 0/0/3
!
dial-peer voice 21002 voip
description TO CUCM PUB
preference 2
destination-pattern 2...
session target ipv4:10.125.65.132
dtmf-relay h245-alphanumeric
no vad
!
!
!
!
telephony-service
srst mode auto-provision all
max-ephones 26
max-dn 30
ip source-address 10.124.103.129 port 2000
timeouts interdigit 4
time-zone 42
time-format 24
voicemail 2999
max-conferences 8 gain -6
transfer-system full-consult
secondary-dialtone 9
create cnf-files version-stamp Jan 01 2002 00:00:00
!
06-21-2014 04:29 PM
Hi ,should someone help me translation the PCM.DAT to audia files?
Many Tks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide