FXS analogue Hotline

[AhmadMA43005]

is it possible to configure Hotline for FXS analogue CUCM SCCP.

[Nithin Eluvathingal · Accepted solution]

You can Go through below link.

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&ved=2ahUKEwjKzYy0nqnrAhWLzYUKHdjPCfMQFjAAegQIAhAB&url=https%3A%2F%2Fwww.cisco.com%2Fc%2Fen%2Fus%2Ftd%2Fdocs%2Fvoice_ip_comm%2Fcucm%2Fadmin%2F10_5_2%2Fccmfeat%2FCUCM_BK_C3A84B33_00_cucm-fe...

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/11_5_1/featureConfig/CUCM_BK_C7DC69D3_00_cucm-feature-configuration-guide_115/CUCM_BK_C7DC69D3_00_cucm-feature-configuration-guide_115_chapter_010101.html

[George Sotiropoulos · Accepted solution]

Dear @AhmadMA43005 ,

Please consult the following documentation where you will find the (PLAR) feature, which allows you to configure a phone so that when the user goes off hook (or the NewCall softkey or line key gets pressed), the phone immediately dials a preconfigured number.

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/11_5_1/featureConfig/CUCM_BK_C7DC69D3_00_cucm-feature-configuration-guide_115/CUCM_BK_C7DC69D3_00_cucm-feature-configuration-guide_115_chapter_010101.html

I hope you find it useful.

George