Hey all. I hope this is a simple one:
A 2801 shows this inventory:
Installed image archive
Cisco 2801 (revision 6.0) with 179200K/17408K bytes of memory.
Processor board ID FHK1044F2QH
2 FastEthernet interfaces
1 ATM interface
1 Virtual Private Network (VPN) Module
1 DSP, 8 Voice resources
1 802.11 Radio
IOS: Version 12.4(15)T1, ADVENTERPRISEK9-M
The 2 new installed cards: 2fxs and 2fxo in slot 0 and 2 are not being recognized.
The PVDM is seen as PVDM2-8 successfully.
After trying a few IOSs i gave up. Any idea what IOS will recognize the VICs?
Many thanks.
