the following messages are being output in my router 2801
May 9 09:51:24.959: [S] mgcp_msg_ack:6166,Updating (*)=172.16.20.12
May 9 09:51:54.955: [S] mgcp_msg_ack:6166,Updating (*)=172.16.20.13
May 9 09:52:24.952: [S] mgcp_msg_ack:6166,Updating (*)=172.16.20.12
with a "debug mgcp packets" applied, the log show is the following:
May 9 11:00:54.493: [S] mgcp_msg_ack:6166,Updating (*)=172.16.20.13
May 9 11:00:54.493: *:NO-MATCH, 172.16.20.12:2427, 172.16.20.13:2427
May 9 11:00:54.493: aaln/S*/SU*/*:NO-MATCH, 172.16.20.12:2427, 172.16.20.13:2427
May 9 11:00:54.493: aaln/S0/SU*/*:NO-MATCH, 172.16.20.12:2427, 172.16.20.13:2427
May 9 11:00:54.497: aaln/S0/SU0/*:NO-MATCH, 172.16.20.12:2427, 172.16.20.13:2427
May 9 11:00:54.497: aaln/S0/SU0/0:NO-MATCH, 172.16.20.12:2427, 172.16.20.13:2427
May 9 11:00:54.497: aaln/S0/SU0/1:NO-MATCH, 172.16.20.12:2427, 172.16.20.13:2427
May 9 11:00:54.985: MGCP Packet sent to 172.16.20.12:2427--->
RSIP 692925753 *@AG_0629-R01 MGCP 0.1
RM: restart
<---
now there are a trouble and this is:
I have an FXS card, with two ports and configured like others fxs in other locations, but these FXS in this router can´t finally register normally
the IOS in show ver is:
Cisco IOS Software, 2801 Software (C2801-ADVENTERPRISEK9-M), Version 12.4(25a), RELEASE SOFTWARE (fc2)
in the call manager the registry is:
Product Cisco: 2801
Gateway : AG_0629-R01.bicentenariobu.com
Protocol _ MGCP
Domain Name: AG_0629-R01.bicentenariobu.com
Description: FXS AG IPSFA 0629
Cisco Unified CallManager Group: CCMB-2
and finally: " no registry"
Product : Cisco MGCP FXS Port
Gateway : AG_0629-R01.bicentenariobu.com
Device Protocol : Acceso analógico
Registration: Unknown -no registry with any server in call manager-
IP Address: Unknown - no ip address-
End-Point Name Required Field : AALN/S0/SU0/0@AG_0629-R01.bicentenariobu.com
can anybody help me with this.
