hi,
ios: Version 12.4(24)T8
cme: 7.1
VIC2-2FXS
I have an analog phone under voice-port 0/2/1
all works fine except sometimes when I call home from outside or when I try to use the phone from inside it doesn't work I have to do a shut and no shut of the interface.
when it doesn't work this is what I've been able to find,
#sh voice dsp
----------------------------FLEX VOICE CARD 0 ------------------------------
*DSP VOICE CHANNELS*
CURR STATE : (busy)inuse (b-out)busy out (bpend)busyout pending
LEGEND : (bad)bad (shut)shutdown (dpend)download pending
DSP DSP DSPWARE CURR BOOT PAK TX/RX
TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABRT PACK COUNT
===== === == ========= ========== ===== ======= === == ========= == ==== ============
C5510 001 01 g711ulaw 24.3.8 busy idle 0 0 0/2/1 01 0 75867/26
*DSP SIGNALING CHANNELS*
DSP DSP DSPWARE CURR BOOT PAK TX/RX
TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABRT PACK COUNT
===== === == ========= ========== ===== ======= === == ========= == ==== ============
C5510 001 01 {flex} 24.3.8 alloc idle 0 0 0/0/0 02 0 43/0
C5510 001 02 {flex} 24.3.8 alloc idle 0 0 0/0/1 06 0 36/0
C5510 001 03 {flex} 24.3.8 alloc idle 0 0 0/2/0 02 0 33/0
C5510 001 04 {flex} 24.3.8 alloc idle 0 0 0/2/1 02 0 766/0
------------------------END OF FLEX VOICE CARD 0 ----------------------------
RTR#sh voice call summary
PORT CODEC VAD VTSP STATE VPM STATE
============== ========= === ==================== ======================
0/0/0 - - - FXOLS_ONHOOK
0/0/1 - - - FXOLS_ONHOOK
0/2/0 - - - FXSLS_ONHOOK
0/2/1 g711ulaw n S_SETUP_REQ_PROC FXSLS_WAIT_OFFHOOK
the phone is not being used but it's s if it's hung the fxs card does not detect that the phone is not being used or something.
voice-port 0/2/1
mwi
cptone CA
timeouts ringing infinity
description *** HOME PHONE ***
station-id name HOMEPHONE
station-id number 41250
caller-id enable
not sure if this is a bug or what. this happens maybe once every 2...3..4 weeks so it doesn't happen every day.
you think moving to IOS 15.0.1M8 will fix this? anyone else had the issue?
I could try to change the phone to the other FXS port but really worth it since this happens every 2...3..4 weeks.
ideas?
thanks.
