I have a network with at least 20 GK registered to two DGK. In each GK are register 15-20 GW equipped with FXS card, connected to the local PBX. In this way I can use all phone connected to these PBX and with 4 to 8 lines I can redirect traffic trough the wan. On each GK are registered all the dial-peer assigned to those FXS port.
so-suc#show gatekeeper endpoints
GATEKEEPER ENDPOINT REGISTRATION
================================
CallSignalAddr Port RASSignalAddr Port Zone Name Type Flags
--------------- ----- --------------- ----- --------- ---- -----
172.24.255.205 1720 172.24.255.205 64379 GK_2315_SUC-CENTR VOIP-GW
E164-ID: 2315
H323-ID: GW_2315_SUC-CENTRO
Voice Capacity Max.= Avail.= Current.= 0
But the FXO interfaces are not registered; for this reason I can’t not reach these dial-peers remotely. I found that just de FXS interface is capable of register with the GK. What I need is some idea of how can I do reachable from different zones the dial-peers configured to user the port of the FXO card. Any help is appreciated.
