ā01-09-2014 08:07 AM - edited ā03-16-2019 09:10 PM
Below are the logs from Gateway ; we are dialing 2 numbers XXXXX443491 and XXXXX442777.
XXXXX42777 --> this is working and XXXXX443491 is not working.
Problem: We are able to dial XXXXX442777 but not XXXXX443491.Below are the logs from Gateway.
Jan 9 12:40:52 GMT: ISDN Se0/1/0:15 Q931: TX -> CALL_PROC pd = 8 callref = 0xB
738
Channel ID i = 0xA98388
Exclusive, Channel 8
Jan 9 12:40:52 GMT: ISDN Se0/1/0:15 Q931: TX -> SETUP pd = 8 callref = 0x00E5
Sending Complete
Bearer Capability i = 0x9090A3
Standard = CCITT
Transfer Capability = 3.1kHz Audio
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98381
Exclusive, Channel 1
Calling Party Number i = 0x00C3, N/A
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, ' XXXXX443491
Plan:Unknown, Type:Unknown
Jan 9 12:40:52 GMT: ISDN Se0/1/0:15 Q931: RX <- CALL_PROC pd = 8 callref = 0x8
0E5
Channel ID i = 0xA98381
Exclusive, Channel 1
Progress Ind i = 0x8288 - In-band info or appropriate now available
Jan 9 12:40:52 GMT: ISDN Se0/1/0:15 Q931: RX <- PROGRESS pd = 8 callref = 0x80
E5
Progress Ind i = 0x8288 - In-band info or appropriate now available
Jan 9 12:40:52 GMT: ISDN Se0/1/0:15 Q931: TX -> PROGRESS pd = 8 callref = 0xB7
38
Progress Ind i = 0x8288 - In-band info or appropriate now available
Jan 9 12:40:56 GMT: ISDN Se0/1/0:15 Q931: RX <- DISCONNECT pd = 8 callref = 0x
80E5
Cause i = 0x8A9C - Invalid number format (incomplete number)
Progress Ind i = 0x8288 - In-band info or appropriate now available
Jan 9 12:40:56 GMT: ISDN Se0/1/0:15 Q931: TX -> DISCONNECT pd = 8 callref = 0x
B738
Cause i = 0x8A9C - Invalid number format (incomplete number)
Progress Ind i = 0x8288 - In-band info or appropriate now available
Jan 9 12:40:56 GMT: ISDN Se0/1/0:15 Q931: RX <- RELEASE pd = 8 callref = 0x373
8
Jan 9 12:40:56 GMT: ISDN Se0/1/0:15 Q931: TX -> RELEASE_COMP pd = 8 callref =
0xB738
Jan 9 12:40:56 GMT: ISDN Se0/1/0:15 Q931: TX -> RELEASE pd = 8 callref = 0x00E
5
Jan 9 12:40:56 GMT: ISDN Se0/1/0:15 Q931: RX <- RELEASE_COMP pd = 8 callref =
0x80E5
Jan 9 12:41:09 GMT: ISDN Se0/1/0:15 Q931: TX -> SETUP pd = 8 callref = 0x00E6
Sending Complete
Bearer Capability i = 0x9090A3
Standard = CCITT
Transfer Capability = 3.1kHz Audio
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98381
Exclusive, Channel 1
Calling Party Number i = 0x0081, '1386425544'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, 'XXXXX442777
Plan:Unknown, Type:Unknown
Jan 9 12:41:09 GMT: ISDN Se0/1/0:15 Q931: RX <- CALL_PROC pd = 8 callref = 0x8
0E6
Channel ID i = 0xA98381
Exclusive, Channel 1
Progress Ind i = 0x8288 - In-band info or appropriate now available
Jan 9 12:41:09 GMT: ISDN Se0/1/0:15 Q931: RX <- PROGRESS pd = 8 callref = 0x80
E6
Progress Ind i = 0x8288 - In-band info or appropriate now available
Jan 9 12:41:11 GMT: ISDN Se0/1/0:15 Q931: RX <- ALERTING pd = 8 callref = 0x80
E6
Progress Ind i = 0x8482 - Destination address is non-ISDN
Jan 9 12:41:24 GMT: ISDN Se0/1/0:15 Q931: RX <- CONNECT pd = 8 callref = 0x80E
6
Connected Number i = 0x00C3
Jan 9 12:41:24 GMT: ISDN Se0/1/0:15 Q931: TX -> CONNECT_ACK pd = 8 callref = 0
x00E6
Jan 9 12:40:52 GMT: ISDN Se0/1/0:15 Q931: TX -> CALL_PROC pd = 8 callref = 0xB
738
Channel ID i = 0xA98388
Exclusive, Channel 8
Jan 9 12:40:52 GMT: ISDN Se0/1/0:15 Q931: TX -> SETUP pd = 8 callref = 0x00E5
Sending Complete
Bearer Capability i = 0x9090A3
Standard = CCITT
Transfer Capability = 3.1kHz Audio
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98381
Exclusive, Channel 1
Calling Party Number i = 0x00C3, N/A
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, XXXXX443491
Plan:Unknown, Type:Unknown
Jan 9 12:40:52 GMT: ISDN Se0/1/0:15 Q931: RX <- CALL_PROC pd = 8 callref = 0x8
0E5
Channel ID i = 0xA98381
Exclusive, Channel 1
Progress Ind i = 0x8288 - In-band info or appropriate now available
Jan 9 12:40:52 GMT: ISDN Se0/1/0:15 Q931: RX <- PROGRESS pd = 8 callref = 0x80
E5
Progress Ind i = 0x8288 - In-band info or appropriate now available
Jan 9 12:40:52 GMT: ISDN Se0/1/0:15 Q931: TX -> PROGRESS pd = 8 callref = 0xB7
38
Progress Ind i = 0x8288 - In-band info or appropriate now available
Jan 9 12:40:56 GMT: ISDN Se0/1/0:15 Q931: RX <- DISCONNECT pd = 8 callref = 0x
80E5
Cause i = 0x8A9C - Invalid number format (incomplete number)
Progress Ind i = 0x8288 - In-band info or appropriate now available
Jan 9 12:40:56 GMT: ISDN Se0/1/0:15 Q931: TX -> DISCONNECT pd = 8 callref = 0x
B738
Cause i = 0x8A9C - Invalid number format (incomplete number)
Progress Ind i = 0x8288 - In-band info or appropriate now available
Jan 9 12:40:56 GMT: ISDN Se0/1/0:15 Q931: RX <- RELEASE pd = 8 callref = 0x373
8
Jan 9 12:40:56 GMT: ISDN Se0/1/0:15 Q931: TX -> RELEASE_COMP pd = 8 callref =
0xB738
Jan 9 12:40:56 GMT: ISDN Se0/1/0:15 Q931: TX -> RELEASE pd = 8 callref = 0x00E
5
Jan 9 12:40:56 GMT: ISDN Se0/1/0:15 Q931: RX <- RELEASE_COMP pd = 8 callref =
0x80E5
Jan 9 12:41:09 GMT: ISDN Se0/1/0:15 Q931: TX -> SETUP pd = 8 callref = 0x00E6
Sending Complete
Bearer Capability i = 0x9090A3
Standard = CCITT
Transfer Capability = 3.1kHz Audio
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98381
Exclusive, Channel 1
Calling Party Number i = 0x0081, 'XXXXX25544'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, XXXXX442777
Plan:Unknown, Type:Unknown
Jan 9 12:41:09 GMT: ISDN Se0/1/0:15 Q931: RX <- CALL_PROC pd = 8 callref = 0x8
0E6
Channel ID i = 0xA98381
Exclusive, Channel 1
Progress Ind i = 0x8288 - In-band info or appropriate now available
Jan 9 12:41:09 GMT: ISDN Se0/1/0:15 Q931: RX <- PROGRESS pd = 8 callref = 0x80
E6
Progress Ind i = 0x8288 - In-band info or appropriate now available
Jan 9 12:41:11 GMT: ISDN Se0/1/0:15 Q931: RX <- ALERTING pd = 8 callref = 0x80
E6
Progress Ind i = 0x8482 - Destination address is non-ISDN
Jan 9 12:41:24 GMT: ISDN Se0/1/0:15 Q931: RX <- CONNECT pd = 8 callref = 0x80E
6
Connected Number i = 0x00C3
Jan 9 12:41:24 GMT: ISDN Se0/1/0:15 Q931: TX -> CONNECT_ACK pd = 8 callref = 0
x00E6
ā01-11-2014 01:31 AM
Well ur ISP tells you the number is invalid or incomplete are you sure that number is in working order and are you sure you are sending called and calling info the format ur ISP expects it?
Sent from Cisco Technical Support iPhone App
ā01-11-2014 01:59 AM
Hi Shobhit,
You are not sending correct caller ID to you Telco when you dial XXXXX443491. Please verify this.
Calling Party Number i = 0x00C3, N/A
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, ' XXXXX443491
Plan:Unknown, Type:Unknown
Calling Party Number i = 0x0081, '1386425544'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, 'XXXXX442777
Plan:Unknown, Type:Unknown
Rate all the helpful post.
Thanks
Manish
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide