cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Cisco Community Designated VIP Class of 2020

172
Views
0
Helpful
1
Replies
Highlighted
Beginner

Getting started with a 2620XM

OK, so I decided to TRY and build my own voice lab.  By the way, I have just the smallest experience with voip.  At my new job, I have to support a UC520 and to help get me familiar with the voip world, I decided to buy a 2620xm off ebay for like $50.  So, I've got this 2620xm and it's maxed out on flash and dram and has one t1 wic card in it and that's all.  It has IOS 12.4(2)T on it along with CME 3.3.  I also have two 7960 IP phones.  I'm not looking for the exact config commands, but can someone lay out the steps in order to get voip configured on the 2620xm so I can play around with it?  All I really want to do is be able to plug in my two 7960 ip phones and call one from the other, and then I'll go from there and expand things.  I'm not a networking noob, just a voip noob.  Thanks!

Everyone's tags (3)
1 REPLY 1
Contributor

Getting started with a 2620XM

I would Google "basic cme config"  You will find plenty to choose from.  Top hit was this one which seems pretty good to me: http://www.ciscopress.com/articles/article.asp?p=1182471&seqNum=2

-- please remember to rate and mark answered helpful posts --
CreatePlease to create content
Content for Community-Ad
FusionCharts will render here