06-16-2010 07:54 AM - edited 03-15-2019 11:16 PM
I am performing an upgrade from CM 4x to CM7x. I was wondering if there are hardware considerations (Phones, DSP's, Gateway's etc) when performing this upgrade?
06-16-2010 07:57 AM
Hi
There are indeed : http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/prod_brochure0900aecd8062a4f9.html
Regards
Aaron
Please rate helpful posts...
06-16-2010 07:59 AM
What about phones, FXS cards, DSP's... etc.
06-16-2010 08:08 AM
Hi
It's rare for support of gateways/VICs or phones to be dropped.
What kit are you concerned about?
Aaron
06-16-2010 09:22 AM
I am not sure what you mean by "kit" if you are talking about UCSS upgrade kits for each platform, I have already ordered all of that. I am more concerned about hardware not supported during/after the upgrade (outside of server hardware). It sounds like all hardware should migrate without issue.
06-16-2010 09:24 AM
Kit = hardware, where I come from :-)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide