cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Walkthrough Wednesdays
578
Views
0
Helpful
4
Replies
niranjandurairaj
Beginner

High packet loss while accessing Cisco Unity Connection 8.0

Hi All Networkers,

This is Niran.  I've installed Cisco Unity Connection 8.0 on VMwareworkstation (72 gb & 2gb ram, Bridged). I'm getting high packet loss while pinging the CUC and takes long time to load the web session.

Here is the ping response :

Reply from 192.168.1.11: bytes=32 time<1ms TTL=64

Request timed out.

Request timed out.

Request timed out.

Request timed out.

Request timed out.

Request timed out.

Reply from 192.168.1.11: bytes=32 time<1ms TTL=64

Reply from 192.168.1.11: bytes=32 time<1ms TTL=64

Reply from 192.168.1.11: bytes=32 time<1ms TTL=64

Reply from 192.168.1.11: bytes=32 time=1ms TTL=64

Reply from 192.168.1.11: bytes=32 time<1ms TTL=64

Request timed out.

Request timed out.

Ping statistics for 192.168.1.11:

    Packets: Sent = 899, Received = 659, Lost = 240

Approximate round trip times in milli-seconds:

    Minimum = 0ms, Maximum = 1999ms, Average = 7ms

Please let me know what may be the problem. Thanks in advance.

4 REPLIES 4
Jaime Valencia
Hall of Fame Cisco Employee

Losing pings is expected, it's a security mechanism.

Slow web access usually points to the fact you're not dedicating the whole memory as you should to the VM.

How much memory does the server/PC/etc has where you installed it?

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

Also, check your duplex settings on the NIC to ensue you are running Full Duplex.

HTH,

Chris

Chris,

I checked my duplex settings, it is Full Duplex

Hi,

My PC configuration is I7 @ 2.20 ghz, 8gb ram and I allocated 2 GB RAM and 72 GB HD for my VMware.

Content for Community-Ad

Spotlight Awards 2021