09-03-2012 12:21 PM - edited 03-16-2019 01:00 PM
Hi All Networkers,
This is Niran. I've installed Cisco Unity Connection 8.0 on VMwareworkstation (72 gb & 2gb ram, Bridged). I'm getting high packet loss while pinging the CUC and takes long time to load the web session.
Here is the ping response :
Reply from 192.168.1.11: bytes=32 time<1ms TTL=64
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Reply from 192.168.1.11: bytes=32 time<1ms TTL=64
Reply from 192.168.1.11: bytes=32 time<1ms TTL=64
Reply from 192.168.1.11: bytes=32 time<1ms TTL=64
Reply from 192.168.1.11: bytes=32 time=1ms TTL=64
Reply from 192.168.1.11: bytes=32 time<1ms TTL=64
Request timed out.
Request timed out.
Ping statistics for 192.168.1.11:
Packets: Sent = 899, Received = 659, Lost = 240
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 1999ms, Average = 7ms
Please let me know what may be the problem. Thanks in advance.
09-03-2012 05:57 PM
Losing pings is expected, it's a security mechanism.
Slow web access usually points to the fact you're not dedicating the whole memory as you should to the VM.
How much memory does the server/PC/etc has where you installed it?
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk
09-03-2012 06:37 PM
Also, check your duplex settings on the NIC to ensue you are running Full Duplex.
HTH,
Chris
09-04-2012 12:48 AM
Chris,
I checked my duplex settings, it is Full Duplex
09-04-2012 12:47 AM
Hi,
My PC configuration is I7 @ 2.20 ghz, 8gb ram and I allocated 2 GB RAM and 72 GB HD for my VMware.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide