05-13-2013 06:56 AM - edited 03-16-2019 05:17 PM
Hello,
The scenario that need to be deployed is that Phone-A are in HUNTGROUP-1 .Also Phone-A is involved in HUNTGROUP-2. Since Phone-A is being intersected into two groups, When applying the softkey Hlog on Phone-A ,Is there anyway that user can choose to logout from one of the associated groups or when logging out it just logs out from all the groups that it associated to by default.
Please advise.
Thanks
Solved! Go to Solution.
05-13-2013 07:06 AM
Hi there,
Sorry...it's all or nothing;
Because the Log Out of Hunt Groups feature is device-based, when the user enables the feature by pressing the HLog softkey, the phone gets logged off from all associated line groups. If a phone has directory numbers that belong to multiple line groups, pressing the HLog softkey logs the phone out of all associated line groups.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_0_1/ccmsys/a03rp.html#wp1100559
Cheers!
Rob
"Talk about a dream
Try to make it real"
- Springsteen
05-13-2013 07:06 AM
Hi there,
Sorry...it's all or nothing;
Because the Log Out of Hunt Groups feature is device-based, when the user enables the feature by pressing the HLog softkey, the phone gets logged off from all associated line groups. If a phone has directory numbers that belong to multiple line groups, pressing the HLog softkey logs the phone out of all associated line groups.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_0_1/ccmsys/a03rp.html#wp1100559
Cheers!
Rob
"Talk about a dream
Try to make it real"
- Springsteen
05-13-2013 07:09 AM
Thanks alot that was helpful
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide