When our faxes receive a second call while busy, the second call overflows to our POTS lines. According to the carrier that happens becuase we are sending a cause code 17 to them which triggers the overflow feature over our ISDN Pri lines. Per the carrier to avoid triggering the overflow we need to send a cause code 31, or some release alert to not trigger the overflow.
In accordance with Cisco TAC the cause code cannot be changed on an H323 GW.
Is there a way to configure callmanager or the GW H323 with a work around that will either send a busy signal to the carrier, or have the system provide a busy signal on the second line?
