How to check time on remote cisco IP phone 7942?

[Eugen Bitca]

Hello,

Cisco IP Phones 7911 and 7940 have correctly updated time-zone, but cisco type 7942 does not want to update timezone.

How to check time on remote cisco IP phone 7942?

Thanks

[ronpatel]

HI

Just give ip address of the phone in internet browser. It will open IP phones information window. It has following information

Time		15:17:34
Time Zone		Asia/Kolkata
Date		26/03/12

Regards

Ronak Patel

Please rate helpful posts.

[Eugen Bitca]

I forgot to say, ip address of the phone in internet browser shows info only for 7911 and 7940, for 7942 does not show anything.

[ronpatel]

Hi

What is the CUCM and Firmware on that phone.

Regards

Ronak Patel

[Eugen Bitca]

Cisco Unified Communications Manager Express

Version 7.1

load 7942 SCCP42.8-3-3S

[Gajanan Pande]

What is the firmware version running on 7942 ? Update it to the latest if not already.

GP.

[Eugen Bitca]

It is installed:

Cisco Unified Communications Manager Express

Version 7.1

load 7942 SCCP42.8-3-3S

What from bellow should I use for a new firmware:

1. apps42.9-2-3TH1-9.sbn

2. cnu42.9-2-3TH1-9.sbn

3. cvm42sccp.9-2-3TH1-9.sbn

4. dsp42.9-2-3TH1-9.sbn

5. jar42sccp.9-2-3TH1-9.sbn

6. SCCP42.9-2-3S.loads

7. term42.default.loads

8. term62.default.loads

[Gajanan Pande]

It will be SCCP42.9-2-3S.loads but am not sure if direct upgrade will be possible looking at present & targetted versions. If it doesnt then an intermediate upgrade step will be needed. Referring the release notes for firmware version 9.2.3 should tell you if it needs one & what it is.

GP.

[ronpatel]

Hi,

Is phone and CME router on same network or are seperate via some VPN.

Also please do no create cnf-files and create cnf-files and reset the phones

Regards

Ronak Patel

Please rate helpful posts.

[Eugen Bitca]

phone and cme are on the same network.

no create cnf-files, create cnf-files and phones reset did not help.