07-09-2015 09:43 PM - edited 03-17-2019 03:36 AM
According to the link
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/service/7_1_2/cdrdef/cdradmin/cdrcallinfo.html we can take two fields as common between Gateway CMR and call manager CDR. globalCallID_callManagerId and globalCallId_callId.
How to configure cisco ios gateway to generate CMR?
Actually I am trying to get the globalCallId_callId from CMR of gateway to map globalCallId_callId from CDR of CUCM.
Thanks,
Pandian
Solved! Go to Solution.
07-09-2015 11:14 PM
Hi Pandian,
For CDR config on the ios gateways the following document is followed
http://www.cisco.com/c/en/us/td/docs/ios/voice/cdr/developer/guide/cdrdev/cdrcsv.html
It does not mention anything separately about cmr but the cdr configuration will need to be done as per the above.
HTH
Manish
07-10-2015 12:09 AM
Hi Pandian,
Yes, that's what i could make out from the available documentation and guides. If someone knows a way to configure the cmr on gateways using any Cisco or third party solution they can reply to this post.
Manish
07-09-2015 11:14 PM
Hi Pandian,
For CDR config on the ios gateways the following document is followed
http://www.cisco.com/c/en/us/td/docs/ios/voice/cdr/developer/guide/cdrdev/cdrcsv.html
It does not mention anything separately about cmr but the cdr configuration will need to be done as per the above.
HTH
Manish
07-10-2015 12:02 AM
Thanks Manish,
To clarify, only CDR can be generated from gateways and not the CMRs correct?
-Pandian
07-10-2015 12:09 AM
Hi Pandian,
Yes, that's what i could make out from the available documentation and guides. If someone knows a way to configure the cmr on gateways using any Cisco or third party solution they can reply to this post.
Manish
07-10-2015 12:14 AM
Thanks a lot Manish...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide