how to Configure FXO ports to make PSTN calls

[Edmar Carvalho]

Someone could give me a little help with configuration about callmanager express versao 4.0,
I need that VG receives and sends calls to PSTN by extensions 1XX,but before that happens have to transform for these two numbers 222322090 e 222321990;please check the configuration below:

voice-port 0/3/0
 cptone PT
 connection plar 100
 impedance complex2
!
voice-port 0/3/1
 cptone PT
 connection plar 100
 impedance complex2
!
!
!
!
!
dial-peer voice 1 pots
 destination-pattern 0.........
 port 0/3/0
 forward-digits 9
!
dial-peer voice 2 pots
 preference 1
 destination-pattern 0.........
 port 0/3/1
 forward-digits 9
!
!
!
!
telephony-service
 load 7960-7940 P00308000500
 load 7941 term41.default.loads
 load 7971 SCCP41.8-2-2SR2S.loads
 max-ephones 40
 max-dn 140
 ip source-address XXXXXXX port 2000
 system message XXXXXX
 max-conferences 8 gain -6
 transfer-system full-consult
 create cnf-files version-stamp Jan 01 2002 00:00:00
!
!
ephone-dn  1
 number 100
 label Recepcao
 name Recepcao

[Jaime Valencia]

Not exactly sure what you want to send as the other numbers, but you can use translation rules for that, the literature for translation rules configuration has plenty of usage examples you can use for reference.

[Edmar Carvalho]

Hi jaime,

I wanna send to PSTN these numbers 222322090 and 222321990,so I have to create a translation rule that transform all my extensions 1XX to these 222322090 and 222321990.