ā07-03-2010 12:06 PM - edited ā03-15-2019 11:32 PM
Hello all,
Could the echo canceller daughter card (EC-MFT-64) be disabled (shutdown) by any IOS command?
The daughter card is seated in 2-Port RJ-48 Multiflex Trunk - T1/E1 card.
The purpose of doing that is to apply the workaound of bug CSCtg92548. The workaound is to remove the daughter card from
voice gateway. I am thinking the better way.....
More info. about the echo canceller daughter card, please see:
http://www.cisco.com/en/US/partner/prod/collateral/modules/ps3115/product_data_sheet0900aecd8028cf5d.html
WIC Slot 1:
VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1
Hardware Revision : 0.0
.....(output omitted)
EM Slot 0:
H/W Echo Canceller (64 Channel)
Hardware Revision : 0.0
.....(output omitted)
Product (FRU) Number : EC-MFT-64
Thanks in advance
ā07-04-2010 10:49 AM
If there was a software workaround, cisco would have indicated that.
Your best course of action is to contact the TAC to find exactly how this bug affects you, and define the next course of action.
ā07-04-2010 11:02 AM
thanks for your reply.
I don't see any software workaround from the bug (CSCtg92548)details. I am just wondering if I could manually disable the daughter card instead of removing it from the box.....
thanks again.
ā07-06-2010 06:55 AM
looks I got the answer:
router(config-voiceport)# echo-cancel enable type software
http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/voice_port_configuration_guide/ch6_hwec.html
Once test it I will share with you folks...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide