12-10-2013 06:08 AM - edited 03-16-2019 08:47 PM
Hello,
does anyone have a guide how to disassemble a 7942/62 phone without damaging it?
Would be nice to know for example to clean the phone or to repair / replace hook switch.
Thanks,
Bernhard
12-10-2013 10:09 AM
You may have seen this, but I'll throw the link in for good measure. https://supportforums.cisco.com/thread/2009132
There are two screws towards the top on the back of the phone (pretty obvious holes.) Then there are two more screws under the ruber feet the the phone body rest on.
TONY
12-13-2013 02:05 AM
The 7942 seems to be different.
There are:
4 Screws on the back.
At the front:
-one at the hook switch
-there seem to be more screws under the bezel (around the display). Unfortunately I don't know how to remove the bezel.
12-13-2013 06:07 AM
Hi Bernhard,
I just took apart a broken 7942 to test the method, but
it seems like they may have changed the design at some point
as this one had 9 screws on the back and a plastic clip on the side
housing to the left of the Hookswitch. It seems like your 7942 may be
more like the method described here
Cheers!
Rob
"When it comes to luck you make your own "
- Springsteen
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide