Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm wondering if it's possible to find how many calls are being dialed to a number that's being translated to another number? I've read some info in the CDR documation that summarized the answer best best with "When you add calling and called party...
I'm looking for a system that will make an emergency call without going to a service provider. A couple requirements are:* No ringback* No inbound voice traffic - only outboundI know I can just set up a phone with PLAR, but it really needs to be si...
I'm trying to set it up so all calls coming from certain lines will have restricted outgoing caller ID information. I've set up separate route patterns as follow:9.[2-9]XXXXXX in the regular partitionwith the Calling Line ID Presentation and Callin...
I came across a somewhat similar issue on an install. *I Think*
The cluster was signed with an internally validated Multi Server certificate per Cisco documentation - http://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communicat...
Absolutely. You can have a mixed environment. You could flip your SCCP phones to SIP if you wanted. In fact many of the newer Cisco endpoints only support a SIP based implementation.
It's looking like the T38 is sticking at version 0 (or 1 which is odd.) I'm looking at line 419 of the debugging output and it's saying it's negotiated at version 1. When searching through the rest of the output I see T38FaxVersion is staying at ...
This could be a good starting point to see what cards are compatible with what you have now.http://www.cisco.com/c/en/us/support/docs/routers/2600-series-multiservice-platforms/5111-voice-comp-matrix.html
