cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1410
Views
0
Helpful
4
Replies

How to eject the DVD from CUC

Jagsuvce G
Level 1
Level 1

Hi,

I need to reboot the CUC server in which i have just upgraded the Patch through SFTP. Before that i had inserted the Bootable DVD (Patch 8.6.2). Its still connected to the server, now i need to remove/eject the DVD from the DVD Drive which is connected to Server.

Any command to eject the dvd ?? I referred all Cisco guides, it says do it physically but the

Pls suggest.

1 Accepted Solution

Accepted Solutions

Jaime Valencia
Cisco Employee
Cisco Employee

There's no command to eject the disk tray, you need to go to the server, and press the eject button

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

View solution in original post

4 Replies 4

Jaime Valencia
Cisco Employee
Cisco Employee

There's no command to eject the disk tray, you need to go to the server, and press the eject button

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

Nagabhushana .g
Level 1
Level 1

If you have ILO(Integrated Lights-Out) access to this server ..then change the booting sequence order CD/DVD to HDD from BIOS setting. So after server restart, server will bootup with CUC OS.

if this helps, please rate

Bhushan

Chris Deren
Hall of Fame
Hall of Fame

What is the server manufacturer?

Chris

Unlucky, i dont have ILO configured and Server model is MCS 7825 H2 .... HP Server.