12-24-2011 07:06 AM - edited 03-16-2019 08:41 AM
Hi Guys,
I am trying to install CME 8.6 in 2900 series router. Which cme file should I download from cisco.com and upload to cme router? I have downloaded the
cme-151-4Mv1 from cisco.com. That was the file available to download for cme 8.6. Kindly help.
Thanks in advance.
Fawaz Khan
Solved! Go to Solution.
12-24-2011 07:49 AM
That is the correct version of IOS for CME 8.6:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm
For full installation/comfigurtation intructions see:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm.html
Also, ensure you have appropriate UC licenses on the router.
HTH,
Chris
12-24-2011 09:58 AM
Fawaz,
7937 is supported on CUCME 8.6. Pls search for 7937 in " Cisco Unified IP Phone Support " table http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucme/requirements/guide/cme86spc.htm.html
Looks like the phoneload/firmware for 7937 is not shipped with CUCME image like it is done for other phone models & that's the reason there is a note for 7937 in above document saying " See software download site for latest firmware version ". This perhaps is the reason, you couldnt find the load file in the image.
Pls rate the post if it helps.
GP.
12-24-2011 07:49 AM
That is the correct version of IOS for CME 8.6:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm
For full installation/comfigurtation intructions see:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm.html
Also, ensure you have appropriate UC licenses on the router.
HTH,
Chris
12-24-2011 09:31 AM
Thnaks Chris Deren.
But I have all these details which you have provided. In the admin guide it does not says the exact file name which has to be downloaded. So what I have done is I have downloaded cme-full-8.0.0.1 and then uploaded to the cme. In the admin guide it does not says for cme 8.6 version which file has to be uploaded to the cme router.
Second thing is that I have cisco 7937 station to be configured here. But in cme-full-8.0.0.1 the load file for cisco 7937 is not there. I am really very confused what to do now. Is it not possible to register cisco 7937 station with cme 8.6?
Thank You.
Fawaz Khan
12-24-2011 09:58 AM
Fawaz,
7937 is supported on CUCME 8.6. Pls search for 7937 in " Cisco Unified IP Phone Support " table http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucme/requirements/guide/cme86spc.htm.html
Looks like the phoneload/firmware for 7937 is not shipped with CUCME image like it is done for other phone models & that's the reason there is a note for 7937 in above document saying " See software download site for latest firmware version ". This perhaps is the reason, you couldnt find the load file in the image.
Pls rate the post if it helps.
GP.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide