How to install the CME14-UL licenses in 4331V router

adeebtaqui · ‎03-05-2023

Greetings

Kindly advise How to install the CME14-UL licenses in 4331V router? We have ordered 28 smart licenses of CME.

what CLI command to used?

I cannot find any relevant information

Jonathan Schulenberg · ‎03-05-2023

Smart Licensing Using Policy for Cisco Enterprise Routing Platforms

adeebtaqui · ‎03-07-2023

The router by default has call home configuration and internet is reachable. Now how should I register the Smart license CME-UL using token copied from smart account.

What command to use for this to allow router to directly communication with Cisco for regsitration?

Jonathan Schulenberg · ‎03-07-2023

Configure Smart Licensing and the functionality you need; the router will report consumption to CSSM.

adeebtaqui · ‎03-07-2023

Thanks but what command on CLI to be used for this as I am not getting the correct config cli command for this. Below is the router config:

!
version 17.3
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
service call-home

#do sh license all
Smart Licensing Status
======================

Smart Licensing is ENABLED

License Conversion:
Automatic Conversion Enabled: False
Status: Not started

Export Authorization Key:
Features Authorized:
<none>

Utility:
Status: DISABLED

Smart Licensing Using Policy:
Status: ENABLED

Data Privacy:
Sending Hostname: yes
Callhome hostname privacy: DISABLED
Smart Licensing hostname privacy: DISABLED
Version privacy: DISABLED

Transport:
Type: cslu
Cslu address: <empty>
Proxy:
Not Configured

Miscellaneous:
Custom Id: <empty>

Policy:
Policy in use: Merged from multiple sources.
Reporting ACK required: yes (CISCO default)
Unenforced/Non-Export Perpetual Attributes:
First report requirement (days): 365 (CISCO default)
Reporting frequency (days): 0 (CISCO default)
Report on change (days): 90 (CISCO default)
Unenforced/Non-Export Subscription Attributes:
First report requirement (days): 90 (CISCO default)
Reporting frequency (days): 90 (CISCO default)
Report on change (days): 90 (CISCO default)
Enforced (Perpetual/Subscription) License Attributes:
First report requirement (days): 0 (CISCO default)
Reporting frequency (days): 0 (CISCO default)
Report on change (days): 0 (CISCO default)
Export (Perpetual/Subscription) License Attributes:
First report requirement (days): 0 (CISCO default)
Reporting frequency (days): 0 (CISCO default)
Report on change (days): 0 (CISCO default)

Usage Reporting:
Last ACK received: <none>
Next ACK deadline: Jan 19 13:37:21 2024 KSA
Reporting push interval: 30 days
Next ACK push check: <none>
Next report push: Feb 12 11:12:52 2023 KSA
Last report push: <none>
Last report file write: <none>

Trust Code Installed: <none>

License Usage
=============

uck9 (ISR_4331_UnifiedCommunication):
Description: uck9
Count: 1
Version: 1.0
Status: IN USE
Export status: NOT RESTRICTED
Feature Name: uck9
Feature Description: uck9
Enforcement type: NOT ENFORCED
License type: Perpetual

Product Information
===================
UDI: PID:ISR4331/K9,SN:FDO251......

Agent Version
=============
Smart Agent for Licensing: 5.0.6_rel/47

License Authorizations
======================
Overall status:
Active: PID:ISR4331/K9,SN:FDO25xxxxxx
Status: NOT INSTALLED
Purchased Licenses:
No Purchase Information Available

Roger Kallberg · ‎03-07-2023

If you search for smart license configuration IOS you’ll quite likely find what you need.

adeebtaqui · ‎03-08-2023

I registered the token on CLI of router and received ACK as below “%SIP-1-LICENSING: SIP service is Up. License #sh license all

Smart Licensing Status

======================

Smart Licensing is ENABLED

License Conversion:

Automatic Conversion Enabled: False

Status: Not started

Export Authorization Key:

Features Authorized:

<none>

Utility:

Status: DISABLED

Smart Licensing Using Policy:

Status: ENABLED

Data Privacy:

Sending Hostname: yes

Callhome hostname privacy: DISABLED

Smart Licensing hostname privacy: DISABLED

Version privacy: DISABLED

Transport:

Type: Smart

URL: https://smartreceiver.cisco.com/licservice/license

Proxy:

Not Configured

Miscellaneous:

Custom Id: <empty>

Policy:

Policy in use: Merged from multiple sources.

Reporting ACK required: yes (CISCO default)

Unenforced/Non-Export Perpetual Attributes:

First report requirement (days): 365 (CISCO default)

Reporting frequency (days): 0 (CISCO default)

Report on change (days): 90 (CISCO default)

Unenforced/Non-Export Subscription Attributes:

First report requirement (days): 90 (CISCO default)

Reporting frequency (days): 90 (CISCO default)

Report on change (days): 90 (CISCO default)

Enforced (Perpetual/Subscription) License Attributes:

First report requirement (days): 0 (CISCO default)

Reporting frequency (days): 0 (CISCO default)

Report on change (days): 0 (CISCO default)

Export (Perpetual/Subscription) License Attributes:

First report requirement (days): 0 (CISCO default)

Reporting frequency (days): 0 (CISCO default)

Report on change (days): 0 (CISCO default)

Usage Reporting:

Last ACK received: Mar 08 12:33:35 2023 KSA

Next ACK deadline: <none>

Reporting push interval: 0 (no reporting)

Next ACK push check: <none>

Next report push: <none>

Last report push: Mar 08 12:28:34 2023 KSA

Last report file write: <none>

Trust Code Installed: Mar 08 12:26:46 2023 KSA

License Usage

=============

uck9 (ISR_4331_UnifiedCommunication):

Description: uck9

Count: 1

Version: 1.0

Status: IN USE

Export status: NOT RESTRICTED

Feature Name: uck9

Feature Description: uck9

Enforcement type: NOT ENFORCED

License type: Perpetual

Product Information

===================

UDI: PID:ISR4331/K9,SN:FDO251809SZ

Agent Version

=============

Smart Agent for Licensing: 5.0.6_rel/47

License Authorizations

======================

Overall status:

Active: PID:ISR4331/K9,SN:FDO251809SZ

Status: NOT INSTALLED

Purchased Licenses:

No Purchase Information Available

Roger Kallberg · ‎03-08-2023

Not sure what you’re trying to get across here. What is your actual problem? If you have successfully registered the router it will use the license it needs from the virtual account in Smart Licensing. Have you configured CME on your router?

adeebtaqui · ‎03-08-2023

Issue is I am not seeing in my show license output the CME14-UL licenses that we purchased for this router and in smart account this license is still showing as Available instead of IN USE.

Below is my runn config:

version 17.3
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
service call-home
platform qfp utilization monitor load 80
platform punt-keepalive disable-kernel-core
!
hostname RIG_JBL_VRTR
!
boot-start-marker
boot-end-marker

!
ip name-server 8.8.8.8 8.8.4.4 84.235.6.55 84.235.57.230
ip domain lookup
ip domain name xx.com
ip dhcp excluded-address 172.21.31.1 172.21.31.9
ip dhcp excluded-address 172.21.31.240 172.21.31.25

ip dhcp pool VOIP
network 172.21.31.0 255.255.255.0
default-router 172.21.31.254
option 150 ip 172.21.31.254
dns-server 84.235.6.55 84.235.57.230
!
!
!
login on-success log
!
!
!
!
!
!
!
subscriber templating
multilink bundle-name authenticated
no device-tracking logging theft
!
!

license udi pid ISR4331/K9 sn xxx
license boot level uck9

interface GigabitEthernet0/0/1
description CORE_SW
no ip address
negotiation auto
!
interface GigabitEthernet0/0/1.9
description FW
encapsulation dot1Q 9
ip address 172.x.x.x 255.255.255.0
!
interface GigabitEthernet0/0/1.11
description MGMT
encapsulation dot1Q 11
ip address 172.x.x.x 255.255.255.0
!
interface GigabitEthernet0/0/1.201
description VOICE VLAN
encapsulation dot1Q 201
ip address 172.x.x.x 255.255.255.0

!
ip http server
ip http authentication local
ip http secure-server
ip http client source-interface GigabitEthernet0/0/0
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 172.x.x.x

telephony-service
max-ephones 50
max-dn 50
ip source-address 172.x.x.x port 2000

!
ephone-dn 1
number 7001
!
!
ephone-dn 2
number 7002
!

!
ephone 1
mac-address 488B.0ABD.8BD9
button 1:1
!
!
!
ephone 2
mac-address 488B.0ABD.8A46
button 1:2
!

line con 0
stopbits 1
line aux 0
stopbits 1
line vty 0 4
login
transport input ssh
!
call-home
! If contact email address in call-home is configured as sch-smart-licensing@cisco.com
! the email address configured in Cisco Smart License Portal will be used as contact email address to send SCH notifications.
contact-email-addr sch-smart-licensing@cisco.com
profile "CiscoTAC-1"
active
destination transport-method http
ntp server 172.x.x.x

Roger Kallberg · ‎03-08-2023

Does gig0/0/0 interface have access to internet as that’s what you use as the source for http?

ip http client source-interface GigabitEthernet0/0/0