04-24-2013 01:15 PM - edited 03-16-2019 04:59 PM
Hi
We are planning for power outage tomorrow , I have 2 UCS210 which include my ( cucm pub and sub, cuxn, uccx, cucm) .
I want to shut it down (switch it off ) how to do that safely and what about VGW 3945.
Thx
Sent from Cisco Technical Support iPad App
Solved! Go to Solution.
04-24-2013 01:38 PM
Just shut down the VMs via CLI or OS admin, then from vSphere you can shutdown the server.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk
04-24-2013 01:55 PM
From CLI of each app issue "util system shutdown", VM should stop automatically when the app powers down, then from CIMC you can shutdown the physical server.
Chris
04-24-2013 01:38 PM
Just shut down the VMs via CLI or OS admin, then from vSphere you can shutdown the server.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk
04-24-2013 01:55 PM
From CLI of each app issue "util system shutdown", VM should stop automatically when the app powers down, then from CIMC you can shutdown the physical server.
Chris
04-25-2013 10:39 AM
Thanks
What is the right way to switch it on again
Thx
Sent from Cisco Technical Support iPad App
04-25-2013 10:56 AM
Login to CIMC and press Power On server
If your VMs are configured to start automatically (recommended setting) all VMs will come online automatically, if not then start the VMs manually.
Chris
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide