03-19-2014 02:01 AM - edited 03-16-2019 10:10 PM
Hi,
we have ccm 7.1.5 and i added new sip trunk (new provider).
When I have missed calls, numbers have one extra "0" in front of number so i am unable to directly call missed number.
How can i remove that extra "0" that that don’t affect other SIP trunks configured on CCM.
Regards,
Ivan
Solved! Go to Solution.
03-19-2014 06:46 AM
If you're adding it, remove the TP or calling transformation pattern from the call flow.
If telco is delivering the call with that leading 0, you'll also need the above options to remove it.
03-19-2014 06:46 AM
If you're adding it, remove the TP or calling transformation pattern from the call flow.
If telco is delivering the call with that leading 0, you'll also need the above options to remove it.
03-20-2014 08:51 AM
I don’t have any Calling Party Transformation Pattern, where else can i remove that "0" or where can I discard it?
03-20-2014 08:51 AM
You can use translation patterns for that as well.
03-20-2014 09:29 AM
Ok, i will try tomorrow.
for example:
When i call from my cell phone (number 0915674XXX) to my test phone 051685XXX
on phone is displayed 000915674XXX.
i would like to see on display 00915674XXX
So i need to create Calling Party Transformation Pattern:
0.0!
and on Calling Party Transformations set:
discard digits - PreDot
Will that be ok?
03-19-2014 06:52 AM
Is there a CUBE in this enviroenment? If so the easiest thing would be to use calling translation rule on CUBE to strip the 0, or you can also use transformation pattern on CUCM (though I dont recall if that was added in CUCM 7 or 8).
Chris
03-20-2014 03:53 AM
There is no CUBE. Today I contact the provider and they told me that thay send me without that extra 0.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide