how to remove the ephone TAG after the CME remove from router

[ciscoroyzhang]

                   HI there,   after removed the CME in one of our branch office router, the TAG with 200XX and port with 50/0/XX, which is auto created when ephone has been enabled still existed. Can someone please help to advice how to remove the those auto created tag? 

Thanks in advance

Roy

[paolo bevilacqua]

Conf t

no exphone

[ciscoroyzhang]

Hi Paolo,  thanks for the reply.  following is what I am talking about,  the command you suggestion is unrecognized in the router. this router is 2821 wiht IOS: C2800NM-SPSERVICESK9-M, try in 2911 same error. any other suggestion ? roy

20001  pots  up   down                              0                           50/0/1

20002  pots  up   down                              0                           50/0/2

20003  pots  up   down                              0                           50/0/3

20004  pots  up   down                              0                           50/0/4

20005  pots  up   down                              0                           50/0/5

20006  pots  up   down                              0                           50/0/6

20007  pots  up   down                              0                           50/0/7

20008  pots  up   down                              0                           50/0/8

20009  pots  up   down                              0                           50/0/9

[paolo bevilacqua]

Once you have issue the command avove, you can ignore anything else.

Please remember to rate useful posts clicing on the stars below.

[ciscoroyzhang]

Hi there,   is any one can help with this? or any suggestions? 

thanks

Roy

[paolo bevilacqua]

Can you explain what is the problem are you having, particularly, what is NOT working ?