Hunting in CUCM 6.1.2

[dc-csa-chn]

Hi,

I need assistance in the Hunting settings

we are using CUCM 6.1.2 ,the hunting is working good.

But i want to customize the settings

Required

========

1.When the members of the Line Group dial outside for Internal extension (CUG) calls . It should Only display the Text "XYZ Team"

2.For Incoming calls coming to that Line group. it should display the DN of the calling Party.

Tried:

=====

1.I tried the Internal alerting, caller Id parameters.But it shows the DN(EXTN) in Braces

eg: XYZ(1234)

2.Tried CLI Resticted option in Hunt Pilot getting Only "PRIVATE" for both incoming and Outcoming.

Looking for the solution

[Jaime Valencia]

Look at this for the outbound calls

Call Display Restrictions

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmfeat/fshosp.html

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

[dc-csa-chn]

Hi,

As Per document

i have created a Translation Pattern for Hunt Pilot .

In Translation Pattern

=======================

1. I tried Calling Name Presentation -Allowed

2.I tried Connected name Presentation

-allowed

While Calling and Connected Line ID are in restricted.

I am able to see the incoming calls calling the Translation Pattern

Calling Party --- Private

Called Party --- DN of calling Party.

It's Good.

When i am making an outbound call from the line group to calling Party through directory,

It shows

Calling Party --Extension

Called Party --XYX (DN)

Need assistance for the Outbound calls.

Thanks