10-02-2013 03:58 AM - edited 03-16-2019 07:39 PM
Hi,
I configured two conference bridges, both registered to CUCM: HW on ISR and SW on CUCM. Conferences on both bridges work fine with internal extensions. I can add offnet party (GSM or PSTN) to the conference only if SW conference bridge chosen in MRGL of Meetme conference initiating IP phone. Only G.711 codec is used in internal LAN and offnet calls.
TIA
10-02-2013 06:39 AM
What codecs do you have configured in the HW CFB??
Is it registered??
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk
10-02-2013 08:07 PM
When trying to call to GSM number from existing conference CUCM sends CANCEL SIP message after TRYING message from GSM gateway.
dspfarm profile 2 conference
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum sessions 1
associate application SCCP
Problem resolved after configuring "maximum sessions 2" under dspfarm profile.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide