02-08-2012 08:53 AM - edited 03-16-2019 09:28 AM
|
Solved! Go to Solution.
02-08-2012 09:37 AM
No way to decrypt and the documentation does explain what you're asking about order and whether you need to reboot or not.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cli_ref/8_6_1/cli_ref_861.html#wp156897
Servers in a cluster use the security password to authenticate communication between servers. You must reset the cluster after you change the security password.
Procedure
Step 1 Change the security password on the publisher server (first node) and then reboot the server (node).
Step 2 Change the security password on all the subsequent servers/nodes to the same password that you created on the first node and restart subsequent nodes, including application servers, to propagate the password change.
Note Cisco recommends that you restart each server after the password is changed on that server.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
02-08-2012 09:37 AM
No way to decrypt and the documentation does explain what you're asking about order and whether you need to reboot or not.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cli_ref/8_6_1/cli_ref_861.html#wp156897
Servers in a cluster use the security password to authenticate communication between servers. You must reset the cluster after you change the security password.
Procedure
Step 1 Change the security password on the publisher server (first node) and then reboot the server (node).
Step 2 Change the security password on all the subsequent servers/nodes to the same password that you created on the first node and restart subsequent nodes, including application servers, to propagate the password change.
Note Cisco recommends that you restart each server after the password is changed on that server.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
02-08-2012 11:24 AM
Hi
You need the password in order to change the password though!
So you would need to follow the password recovery procedure as listed here:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cucos/7_1_2/cucos/iptpch2.html#wp1044244
On all servers... AFAIK it doesn't actually matter which order, but they won't communicate properly until they're all done and rebooted.
Principal Engineer at Logicalis UK
Please rate helpful posts...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide