02-08-2012 11:15 AM - edited 03-16-2019 09:28 AM
Hi all,
I m using a CME 8.8 , and i want know if there is a possibility to have a different ring according the type of call :
Example : we have a following DN 1000, the customer want to a have a different ring according to :
1- External incoming call to 1000
2- Internal incoming call to 1000
Thanks for help
Hicham
02-08-2012 11:19 AM
As far as I know this is not possible on same line.
You can although create 2 different extensions on separate line buttons on the Phone and change the ringtone from the IP phone for each line button if IP phone has 2 buttons minimum.
02-08-2012 11:19 AM
Hi
You already have a 'different' ring of sorts by default - internal calls should ring once (i.e. 'ring', whereas external do a double-ring (i.e. 'ring ring').
It's seomthing you don't notice until it's been pointed out, but then it seems pretty obvious!
Principal Engineer at Logicalis UK
Please rate helpful posts...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide