04-03-2018 11:57 AM - edited 03-17-2019 12:32 PM
Hello,
I running a CUCM Lab with CUCM version System version: 11.5.1.14900-11, i cannot dial the +E.164 Alternalte Number, at the learned numbers i see the DNs of the other cluster but i unable to dial them.
Regards
Leonardo Santana
Solved! Go to Solution.
04-04-2018 11:01 AM
04-03-2018 09:18 PM
04-04-2018 05:44 AM
I see the learned numbers, but when i dial i hear i busy tone.
I have 2 CUCM has Spoke Clusters and one as the HUB
There is something else to configure?
Regards
04-04-2018 06:29 AM
Do you have the route patterns in place to call those numbers?
04-04-2018 06:33 AM
Jaime,
Do i need to have route patterns to the alternate numbers?
The Spoke Cluster learned from the SME
Regards
Leonardo Santana
04-04-2018 06:36 AM
The server learned this numbers
Why is necessary to create route pattern to them if we learnerd with ILS/GDPR?
04-04-2018 09:04 AM
You need a SIP Route Pattern for the learned/advertised Route String. Did you do that?
"To be able to reach destinations learned through GDPR, the calling device's calling search space has to include the partition that the GDPR learned pattern is residing in and also the partition that the SIP route pattern resides in, which matches the SIP route string associated with the GDPR learned destination."
Source: CUCM SRND
04-04-2018 09:18 AM
Yes, the css has the partition of the learned numbers.
I created a SIP Route Pattern to the URI dial.
Do i need to create route pattern to the learned numbers?
Regards
04-04-2018 09:34 AM
04-04-2018 10:09 AM
Hello,
04-04-2018 11:01 AM
04-05-2018 10:25 AM
Sorry wich one?
04-05-2018 01:54 PM
The problem was that the Advertised Route String of the HUB CLUSTER and the SIP Route Pattern of the SPOKE CLUSTER were different and vice versa.
Now its working fine, dialing the advertised numbers and URI.
Thanks...
Regards
04-04-2018 10:01 AM
04-04-2018 10:10 AM
I´ll check this doc
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide