Immplemting VOIP Qos Over MPLS Network

[mohdibrahim01]

Hi,

Right now i been ask by mangment to deploye Qos for voice traffice and we have around 37 remote office all connected through MPLS network bandwidht

start from 2 MB upto 30 MB each site can have 5 IP phone and can goze upto 500 IP Phone .

I tried to calculate the required bandwidht for each branch but i could find simple fourmla to do that.

any advice what is the best way to compleate this activity .

regards

Moe

[mopauly]

Hopefully this will help shed some light on it for you; we are doing it now point to point but I don't know your exact environment.

http://www.cisco.com/en/US/customer/tech/tk652/tk698/tech_configuration_guides_list.html

http://www.cisco.com/en/US/customer/tech/tk436/tk428/technologies_white_paper09186a00800a4455.shtml

http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6557/ps6607/prod_presentation0900aecd8031280f.pdf

Hope this helps