Cham,
Looks like you are matching the default dial peer "0" for the incoming call
Try adding this :-
!
dial-peer voice 100 pots
description *** FOR INCOMING CALL MATCHING ***
incoming called-number .
direct-inward-dial
port 0/0/0
!
!
dial-peer voice 101 pots
description *** FOR INCOMING CALL MATCHING ***
incoming called-number .
direct-inward-dial
port 0/0/1
!
!
dial-peer voice 102 pots
description *** FOR INCOMING CALL MATCHING ***
incoming called-number .
direct-inward-dial
port 0/0/2
!
dial-peer voice 103 pots
description *** FOR INCOMING CALL MATCHING ***
incoming called-number .
direct-inward-dial
port 0/0/3
!
Regards,
Alex.
Please rate useful posts.
Regards,
Alex.
Please rate useful posts.