10-24-2019 02:26 PM
We are utilizing an AXIS A8004 VE SIP Intercom and have it set to auto dial an extension on a Cisco 8865. I have followed the recommended configuration per AXIS's support document (attached). The video call will display inverted to the 8865. I have changed the Video Stream-Rotate Image setting to 180 and auto but the video remains inverted unless I physically invert the AXIS A8004 intercom. Video calls among 8845 and 8865s will display correctly in the upright position. Accessing the Live Stream of the AXIS Camera from its own accessible URL page displays correctly. Both Cisco 8865 and AXIS A8004 are registered in our 12.0.1 CUCM, the AXIS device being registered as a Third Party SIP Device. Any help or direction on correcting this will be greatly appreciated.
10-25-2019 05:53 AM - edited 10-25-2019 05:53 AM
What happens when you call from Axis Intercom to Cisco 8845?
10-25-2019 08:50 AM
Call audio is clear, the video coming from the intercom is inverted. This is also occurs when calling from an 8845, 8865, Jabber CSF to the AXIS intercom as well. The video from the intercom remains upside down.
10-25-2019 08:59 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide