I have an issue with the correct time being displayed on CIPC. There are 2 configured in the system and they both are exactly 4 hours fast. No other phone has this issue. The router has the correct time, NTP is accessible and working and the time zone is configured under telephony services so I am all out of ideas! Can anyone think of anything?
Sent from Cisco Technical Support iPhone App
Create the template:
CUCME(config)#ephone-template 1 <---Doesn't have to be 1
CUCME(config-ephone-template)#type CIPC <---Phone type, CIPC is for Cisco IP Communicator
Then on your phones:
CUCME(config-ephone)#ephone-template 1 <--This needs to match the number used above.
Then reset the phone.