01-18-2007 10:28 PM - edited 03-14-2019 07:37 PM
Dear all,
I have a CME with timezone +8. the clock of CME is sync with NTP Server which is at timezone -13.
on router ->
show clock: it is 11:00a.m. 19-jan
on IP phone ->
the clock is 07:00p.m. 18-jan
It seem the IP phone get the clock of NTP Server.
On cme router, i have below config.
clock timezone TW 8
telephony-service
time-zone 8
How can I sync the time on IP Phone to locate time?
Thanks.
01-18-2007 11:26 PM
Can you perform the following?
telephony-service
create cnf-files
And then reset the phones. Let me know if that helps.
01-19-2007 12:46 AM
Sorry. It doesnt' work. Any other method.
Thanks.
01-19-2007 06:39 AM
I find out that the time zone under telephony service is different from UTC.
on router,
clock time-zone TW 8
telephony-service
time-zone 42
then, issue create cnf-file and reset the phone. The clock is then correct.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide