03-02-2014 11:13 PM - edited 03-16-2019 09:58 PM
Hi ,
I am facing an strange issue.
I have configured 7960 as SIP phone in my network and every phone has total 6 DN configured on it .Recently few ip phones in the network started showing cross mark on 2-3 DN line automatically and i will not be able to make any calls from that line during the time of issue.
This happens on random phones and once after i reboot the ip phone cross mark goes off and phones starts working normally. This issue happens randomly on different phones.
Also if i reboot the PC which is directly connected to IP Phone , the phone will go into "configuring IP" mode automatically and comes up normally.
Is it the proper behaviour.
Any help will be appriciated. i am also attaching the logs.
Thanks in advance,
Siddu
03-02-2014 11:45 PM
Hi Sid
Checking your Logs, looks like this Phone is registered with CME. Correct? Please share the CME Configuration and highlight the Trouble Ephone.
- Basant
03-03-2014 12:02 AM
Hi Basant ,
IP Phones are registering to third party SIP Proxy server not to CME.
And i got below error logs from the ip phone , is there any issue with the IP Phone software or hardware .
[05:47:05:129227341] LINE 10/5: --0x00071c4d-- : SIP_REG_STATE_IDLE <- E_SIP_REG_REG_REQ
[05:47:05:129227342] SIPSPISendRegister: Sending REGISTER...
[05:47:05:129227343] get_next_request_trx_index: Getting next TRX index, sent = 1
[05:47:05:129227343] get_next_request_trx_index: Got TRX(0) for sent req
[05:47:05:129227344] get_last_request_trx_index: Getting last TRX index, sent = 1
[05:47:05:129227344] get_last_request_trx_index: Got TRX(0) for sent req
[05:47:05:129227345] get_last_request_trx_index: Getting last TRX index, sent = 1
[05:47:05:129227346] get_last_request_trx_index: Got TRX(0) for sent req
[05:47:05:129227348] get_last_request_trx_index: Getting last TRX index, sent = 1
[05:47:05:129227349] get_last_request_trx_index: Got TRX(0) for sent req
[05:47:05:129227351] sipTransportSendMessage: ccb <10>: config <10.249.141.11>:<5060> - remote <10.249.141.11>:<5060>
[05:47:05:129227352] sipTransportSendMessage: Got handle -1
[05:47:05:129227352] sip_platform_udp_channel_create: UdpOpen(R IP=184126731, R Port=5060, L Port=0) failed
[05:47:05:129227353] sipTransportSendMessage: Error: sip_platform_udp_channel_create() returned error.
[05:47:05:129227354] LINE 10/5: sipTransportCreateSendMessage : Error: sip_sm_cc_channel_send_buf_fcn() returned error.
[05:47:05:129227355] LINE 10/5: sipTransportCreateSendMessage : Stored message not sent
[05:47:05:129227355] SendRequest: Error: sipTransportCreateSendMessage() returned error.
[05:47:05:129227356] clean_method_request_trx: Removing TRX for method(REGISTER), sent = 1
[05:47:05:129227356] clean_method_request_trx: Removed TRX(0) for method(REGISTER)
[05:47:05:129227357] LINE 10/5: ccsip_register_cleanup : Starting expires timer (60 sec)
[05:47:05:129227357] LINE 10/5: Registration state change: SIP_REG_STATE_IDLE ---> SIP_REG_STATE_IDLE
[05:47:05:129227359] LINE 10/5: sip_sm_call_cleanup : Cleaning up the call
[05:47:05:129227360] %E600 REG send failure: REGISTER
[05:47:05:129227360] LINE 10/5: Registration state change: SIP_REG_STATE_IDLE ---> SIP_REG_STATE_REGISTERING
Regards,
Siddu
03-03-2014 12:36 AM
I see a number of "Registration Timer Expire" messages after every 5 minutes or so:-
SIP Phone> [05:43:56:129208417] SIPTaskProcessListEvent: cmd = 0x0
[05:43:56:129208417] LINE 8/3: --0x00071d67-- : SIP_REG_STATE_REGISTERED <- E_SIP_REG_TMR_EXPIRE
[05:43:56:129208418] LINE 8/3: sip_sm_call_cleanup : Cleaning up the call
[05:43:56:129208418] ccsip_register_send_msg: cmd=0x161c01
SIP Phone> debug sip-trx[05:43:59:129208770] SIPTaskProcessListEvent: cmd = 0x0
[05:43:59:129208770] LINE 9/4: --0x00071d67-- : SIP_REG_STATE_REGISTERING <- E_SIP_REG_TMR_EXPIRE
[05:43:59:129208771] LINE 9/4: sip_sm_call_cleanup : Cleaning up the call
[05:43:59:129208771] ccsip_register_send_msg: cmd=0x161c01
[05:43:59:129208772] SIPTaskProcessListEvent: cmd = 0x161c01
[05:44:04:129209272] LINE 10/5: --0x00071d67-- : SIP_REG_STATE_REGISTERING <- E_SIP_REG_TMR_EXPIRE
[05:44:04:129209273] LINE 10/5: sip_sm_call_cleanup : Cleaning up the call
[05:44:04:129209273] ccsip_register_send_msg: cmd=0x161c01
[05:44:04:129209274] SIPTaskProcessListEvent: cmd = 0x161c01
Try increasing the Registration Timer for these D's on your 3rd party SIP proxy. In CME if manage these timers using this command:-
registrar server expires max 1200 min 300
- Basant
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide