06-22-2010 11:51 PM - edited 03-15-2019 11:21 PM
Dear All
I Have cucm 8.0 with cisco ip phone 7945
my problem is when someone call me during my conversation with my ip phone
i want redirect the call to my secretary
i added "Redirect" softkey to my ip phone during "ring-in"
but the button is inactive
any idea please
Solved! Go to Solution.
06-23-2010 07:55 AM
Have you already configured IPMA to use that softkey???
When the assistant logs in from the Assistant Console, the softkeys Redirect and Transfer to Voice Mail become active for the proxy lines. Refer to the Cisco Unified Communications Manager Assistant User Guide for more information.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_0_2/ccmfeat/fsipma.html
Unless you're using IPMA the softkey is useless.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
06-23-2010 06:10 AM
Hi Hani,
I'm not really sure about the Redirect Softkey, as it is not shown on our CUCM
But I'm guessing that it may be the equivalent of DND...if so;
In CUCM 8.x the Call Reject function
will follow the Call Forward No Answer setting on a phone, so if the CFNA is configured to go
to Voicemail then the call will flow that way in DND
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_0_1/ccmfeat/fsdnd.html#wp1073696
Normal Call with DND and Call Forward No Answer Enabled on a Nonshared Line
The following steps show the call flow for a call that you make to a phone with both DND and Call Forward No Answer active:
1. Phone B configures Call Forward No Answer to forward calls to Phone C.
2. Phone B activates DND.
3. Phone A calls Phone B.
4. Phone B beeps and does not answer the call.
5. The call gets forwarded to phone C, which rings normally.
In your case use DN xxxx (the Secretary DN)to replace phone C in both steps 1 and 5
Cheers!
Rob
Please support CSC Helps Haiti
06-23-2010 07:55 AM
Have you already configured IPMA to use that softkey???
When the assistant logs in from the Assistant Console, the softkeys Redirect and Transfer to Voice Mail become active for the proxy lines. Refer to the Cisco Unified Communications Manager Assistant User Guide for more information.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_0_2/ccmfeat/fsipma.html
Unless you're using IPMA the softkey is useless.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide