cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
195
Views
0
Helpful
1
Replies

IP Phone register to UC

JiangBo Tao
Level 1
Level 1

Hi, everyone, this is first time i am using this, so I don't know where I submit enough information or not. thanks first. The question is: we have been using UC540W for a long time, now we bought two new IP Phones(7821), the new IP Phones can be registered with UC540W or not, thanks again.

This is hardware information:

 

VCSGOFCUC540#show version

Cisco IOS Software, UC500 Software (UC500-ADVIPSERVICESK9-M), Version 15.1(4)M5, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2012 by Cisco Systems, Inc.

Compiled Tue 04-Sep-12 20:45 by prod_rel_team

 

ROM: System Bootstrap, Version 12.4(24r)SB, RELEASE SOFTWARE (fc1)

 

VCSGOFCUC540 uptime is 2 hours, 13 minutes

System returned to ROM by reload at 11:56:17 SG Fri Dec 16 2016

System restarted at 11:57:10 SG Fri Dec 16 2016

System image file is "flash:/uc500-advipservicesk9-mz.151-4.M5"

Last reload type: Normal Reload

Last reload reason: Reload Command

 

 

 

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

 

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

 

If you require further assistance please contact us by sending email to

export@cisco.com.

 

Cisco UC540W-FXO-K9 (MPC8358) processor (revision 0x100) with 235520K/26624K bytes of memory.

Processor board ID FGL170920M5

MPC8358 CPU Rev: Part Number 0x804A, Revision ID 0x20

30 User Licenses

10 FastEthernet interfaces

11 Serial interfaces

2 terminal lines

1 Channelized E1/PRI port

1 Virtual Private Network (VPN) Module

4 Voice FXO interfaces

4 Voice FXS interfaces

1 Voice MoH interface

1 802.11 Radio

1 cisco service engine(s)

128K bytes of non-volatile configuration memory.

250880K bytes of ATA CompactFlash (Read/Write)

 

 

License Info:

 

License UDI:

 

-------------------------------------------------

Device#   PID                   SN

-------------------------------------------------

*0        UC540W-FXO-K9         FGL172920M3     

 

 

 

Configuration register is 0x2102

 

 

VCSGOFCUC540#show inventory

NAME: "UC540W-FXO-K9 Chassis", DESCR: "UC540W-FXO-K9 Chassis"

PID: UC540W-FXO-K9     , VID: V01, SN: FGL172920M3

 

NAME: "VWIC2-1MFT-T1/E1 - 1-Port RJ-48 Multiflex Trunk - T1/E1 in DaughterCard Slot 2", DESCR: "VWIC2-1MFT-T1/E1 - 1-Port RJ-48 Multiflex Trunk - T1/E1"

PID: VWIC2-1MFT-T1/E1  , VID: V01 , SN: FOC11190A5S

1 Reply 1

Manish Gogna
Cisco Employee
Cisco Employee

Hi Jiangbo,

UC540 supports the following phone models:

Choice of Cisco Unified IP Phones 6900 and 7900 Series and Cisco Small Business SPA Series IP Phones, including wireless handsets and Session Initiation Protocol (SIP) phones.

More details here

http://www.cisco.com/c/en/us/products/collateral/unified-communications/unity-express/data_sheet_c78-554289.html

You may consider looking at the BE6000 or CUCME solution for supporting these new phones by checking their datasheets to start with.

HTH

Manish