cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
307
Views
5
Helpful
3
Replies

IP Phone registration Issue

mzee.sidd
Beginner
Beginner

We are trying to register IP Phones model 7821, 7861 in CUCM version 12.5 SU3. But as soon as we connect the phones into the network , it gets upgraded and then show the options i.e." Provision a new phone and Replace an existing phone". As we select the provision a new phone, it asks for activation code. Can we skip this step to register the phones?

3 Replies 3

Nithin Eluvathingal
VIP Mentor VIP Mentor
VIP Mentor

Provision a new phone and Replace an existing phone:- its a new feature called phone migration. 

 

If you add the phones manually, Make sure you selected correct device type and added correct  Mac address with a DN assigned. make sure you configured Option 150 which  is your TFTP server IP address. And make sure that on phone settings its showing the correct TFTP address. 

 

 

 

If you are not adding the phone manually, make sure you have auto provisions enabled on your CUCM.

 

 



Response Signature


Hi,

 

We are trying to register the phone manually and even gave the tftp ip statically but still observing the same options of provisioning a new phone and replace an existing phone. We also tried to change the on premise device onboarding under device defaults from device activation to auto registration and vice versa but still facing the same issue.

We are trying to register the phone manually and even gave the tftp ip statically but still observing the same options of provisioning a new phone and replace an existing phone.No, phone wont give this option if it can communicate with the CUCM. Recheck the network connectivity.



Response Signature


Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers