12-03-2014 04:48 AM - edited 03-17-2019 01:11 AM
Hi all,
I've an issue about Speed Dials on ip phone 3905.
here seems that speed dials are supported by 3905.
Unfortunately from different documents I see that speed dials on 3905 are not supported and also in self care portal, under speed dials it appears FEATURE NOT SUPPORTED.
Is there someone that can halp me ?
Thanks.
12-03-2014 05:06 AM
Hi Francesco.
Which version of CUCM are you running?
This what I've found on various docs.
Speed Dial feature is not supported on the Cisco Unified IP Phones 6901, 6911, and 3905. However, speed dials that are not displayed on the phones will be available as abbreviated dials.
HTH
Regards
Carlo
12-03-2014 05:17 AM
Ops.. sorry 10.0 :)
I added a 3905 on my 9.1, 10.0 and 10.5 CUCM and the result is that I can add speed dials but, because 3905 is a single line IP phone, they are treated as abbreviated dial.
HTH
Regards
Carlo
12-03-2014 06:37 AM
Thanks Carlo.
can you tell me what kind of license you have on the user ?
12-03-2014 06:48 AM
Hi Francesco,
Just an UCL Essential.
Cheers
Carlo
12-03-2014 07:04 AM
exact....... and firmware ? my firmware is 9.4.1.0
12-03-2014 07:10 AM
Exactly the same on all cucm version.
Carlo
12-03-2014 07:21 AM
12-03-2014 08:05 AM
Hi Francesco.
Sorry for too fast reply.
On 10.x IP Phone was 7905 not 3905 sorry again :(
Yes I can confirm that in 10.X you cannot add speed dial on 3905 phone
Cheers
Carlo
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide