06-05-2012 01:38 PM - edited 03-16-2019 11:31 AM
Hi!
Is it possible to debug DTMF event ( when gataway receive/transmit DTMF tone over ISDN PRI ) on 28XX/29XX/5350XM gateways?
On analog FXO ports there is a 'debug vpm signal' command
I looking similar coommand for PRI tone debugging ...
/lexxa
06-05-2012 03:12 PM
Lexxa7777
Yes this is possible..here is the debug:
debug voip rtp session named-event
Please rate useful posts
"I am complete in God, God completes me"
06-06-2012 12:11 AM
Hi aokanlawon, thanks for you reply
but 'debug voip rtp session named-event' shows that gateway send/recieve dtmf event on VOIP call leg as NTE event ( when configured dtmf relay rtp-nte )
I need a debug on POTS leg, when gataway recieve a tone in B-channel
I have a strange case. Sometimes digits duplicate and I want to control what gateway really recieves in B-channel.
/lexxa
06-06-2012 12:45 AM
Try this..
debug vtsp dsp:
shows the digits as they are received by the voice port. The following output example shows the collection of DTMF digits from the DSP:
!-- Caller entered digits 5000.
!-- The DSP detects DTMF digits. Digit 5 was
!-- detected with ON time of 130msec.
*Mar 10 17:57:08.505: vtsp_process_dsp_message:
MSG_TX_DTMF_DIGIT_BEGIN: digit=5,
*Mar 10 17:57:08.585: vtsp_process_dsp_message:
MSG_TX_DTMF_DIGIT_OFF: digit=5,
duration=130
*Mar 10 17:57:09.385: vtsp_process_dsp_message:
MSG_TX_DTMF_DIGIT_BEGIN: digit=0
*Mar 10 17:57:09.485: vtsp_process_dsp_message:
MSG_TX_DTMF_DIGIT_OFF: digit=0,
duration=150
*Mar 10 17:57:10.697: vtsp_process_dsp_message:
MSG_TX_DTMF_DIGIT_BEGIN: digit=0
*Mar 10 17:57:10.825: vtsp_process_dsp_message:
MSG_TX_DTMF_DIGIT_OFF: digit=0,
duration=180
*Mar 10 17:57:12.865: vtsp_process_dsp_message:
MSG_TX_DTMF_DIGIT_BEGIN: digit=0
*Mar 10 17:57:12.917: vtsp_process_dsp_message:
MSG_TX_DTMF_DIGIT_OFF: digit=0,
duration=100
Please rate useful posts
"I am complete in God, God completes me"
06-06-2012 03:10 AM
Thanks for right direction
debug vtsp dsp: seems like working on analog ports
but debug voip vtsp session ( on 5350XM) shows digits during mid-call
Jun 6 13:56:50.521: //5004160/xxxxxxxxxxxx/VTSP:(3/1:D):30:0:0/vtsp_dsm_digit_begin_cb: Begin Digit=5
Jun 6 13:56:50.521: //5004160/xxxxxxxxxxxx/VTSP:(3/1:D):30:0:0/vtsp_dsm_digit_begin_cb:
Digit Reporting=FALSE, Digit Consume=FALSE, Digit Relay=TRUE
Jun 6 13:56:51.537: //5004160/xxxxxxxxxxxx/VTSP:(3/1:D):30:0:0/vtsp_dsm_digit_end_cb: End Digit=5
btw debug voip vtsp tone shows nothing
10-03-2013 09:49 AM
debug voip dsm dsp (new version of debug vtsp dsp) doesn't provide any digits on 3945 PRI.
neither does debug voip vtsp session
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide