03-11-2009 09:40 AM - edited 03-15-2019 04:46 PM
hi, i had to change the sip port that the cme uses to establish sip connections, the new port is 5061, so i want to know if in the cue, could i change that port?
Solved! Go to Solution.
03-11-2009 10:19 AM
Yes, you can. Try the following commands. Keep in mind the port for your CUE module could be different.
router#service-module service-engine 0/0 session
cue#conf t
cue(config)#ccn subsystem sip
cue(config-sip)#gateway port 5061
Hope this helps.
Brandon
03-11-2009 10:19 AM
Yes, you can. Try the following commands. Keep in mind the port for your CUE module could be different.
router#service-module service-engine 0/0 session
cue#conf t
cue(config)#ccn subsystem sip
cue(config-sip)#gateway port 5061
Hope this helps.
Brandon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide