cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1370
Views
0
Helpful
5
Replies

isdn cause code 0x84a9

whanson
Level 2
Level 2

has anyone had experience with this type of error.

5 Replies 5

Jaime Valencia
Cisco Employee
Cisco Employee

if i recall correctly, that code belongs to temporary failure on the public network serving the remote user side

javalenc

HTH

java

if this helps, please rate

Did you find a resolution for getting this error?

Cause i = 0x84A9 - Temporary failure

I get this 30 seconds into leaving a voicemail.

maybe this?

Cisco Unity voicemails are cut off after 30 seconds

http://www.ciscotaccc.com/kaidara-advisor/voice/showcase?case=K88174040

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

yiosepvaldes
Level 1
Level 1

hi,

anyone find answer help me with the same error but my scenario is something different.

the call flow where this happen is following: PSTN-GW(MGCP)-CUCM713-CUCM802-IPPHONE.

once a call comes in and goes through the gateway I get a tone reordering.

A re-order tone suggests you do not have "direct-inward-dial enabled" on your pots dial-peer so the router attempts to use two stage dialling

To resolve this, do the ff:

dial-peer voice 9999 pots

incoming called-number.

direct-inward-dial

Please rate all useful posts