You need to have IOS feature

cameroun · ‎09-19-2014

Hello everyone .
I have a 3925 router with license:

ipbasek9
uck9
securityk9

I have to configure the IP phones 7841 and 9971 .

In the flash , there is no configuration file telephones.
Can you tell me how? because the phones do not register.
kind regards

Tagir Temirgaliyev · ‎09-19-2014

IP phones 7841 are SIP and 9971 too

thise phones can not be configured as sccp

to configure 7841 you need 15.4 ios and configure it as fast truck

here are examples

cameroun · ‎09-19-2014

Hi Tagir,

I've the 15.4 version. could you give me a link for configure theses ip phone model?

thank you in advance

Tagir Temirgaliyev · ‎09-19-2014

https://communities.cisco.com/thread/39200?start=15&tstart=0

cameroun · ‎09-19-2014

on my ip phone, the status message displays: SEPXXXXXXXXX.cnf.xml not found.

How can i resolve this issue?

Aman Soi · ‎09-19-2014

You need to have IOS feature set along with license. Licneses are RTU /honour based.

You can check the comaptibility matrix

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/requirements/guide/33matrix.html

regds,

aman

ISR 3925: Phone not Registered